Peter Daly

Peter Daly, P.Eng.

Engineering Consultant
Address: 4510 Fordham Cr. S.E.
Calgary Alta.
E-mail: dalyp@shaw.ca
Phone: 403-272-4308
Cell: 403-861-5382

OIL & GAS – ENGINEERING CONSULTANT


Specialization: Mining Engineer of 27 years in oilfield work with experience in wellsite supervision, programming completions, engineering design, data interpretation and writing completion programs. Wellbore Productivity Reviews, Log interpretation (open and cased hole),

Key Qualifications:

Contracted to write well completion programs and field supervision of completion and testing programs on high pressure sweet and sour, oil and gas wells.

Programmed and field supervised perforating, acid and frac stimulation as well as snubbing and testing of low temperature, high pressure (3500 psi) hydrate producing gas wells

Programmed and supervised rig-less coil tubing completions in gas and oil wells

Contracted to do operations engineering for new cased hole sour logging line, selected equipment did field testing and established parameters for the new line. Setup overseas logging operation (Saudia Arabia) and interpreted log data.

Contracted for expert legal opinion on well completion technique used by large Canadian oil company .

Field program design, cost feasibility and evaluation along with coordinating service companies for work on a new experimental downhill formation heater.

Evaluation of well files and writing programs for potential uphole oil and gas bearing zones for Pembina Resources, Columbia Gas, Petro Canada, Home Oil, Amerada Hess also Bridge Petroleum and Hartogen Oil and Gas of Australia.

Interpretation of open hole measurements in sandstone and carbonate reservoirs: Neutron, Density, Gamma-Ray, Compensated Sonic, Long Spaced Sonic, Dipmeter Resistivity tools, Induction, Laterolog, and Microresistivity, Sidewall Cores

Interpretation of cased hole measurements in sandstone and carbonate reservoirs: Neutron, Gamma-Ray Neutron, Cement Bond Log, Cement Evaluation Logs, Temperature, Flowmeter, Fluid Density, Pressure, Radioactive Tracer, Cased Hole formation Tester, Perforating, Plugs, Packers, Fluid Samplers

Work Experience:

Engineering Firm Contracted to do supervision of completion programs for oil and gas

Present--June 1998

  • Supervised completion of gas and oil wells, where underbalanced conditions were required
  • Supervised fracs and cleanups along with snubbing and testing operations

    Genco Pressure Control - Consultant Operations Engineer,
    Oct 1995 – June. 1998

  • In charge of operational and field testing of new cased hole “conductor slick line”
  • Field tested new cased hole applications for the conductor slick line
  • Setup overseas cased hole logging operation in Middle East – selected downhole tools , evaluated and interpreted results

    DST Inc. – Operation Engineer
    Jan 1995 – Oct 1995

  • Supervised field operations for new surface computer controlled readout drill-stem testing system
  • Designed wireline equipment for wet connect system for surface readout.

    Porteous Engineering Limited – Consultant,
    June 1988 -- June1993

  • Co-founder of the Suspended Well Evaluation group
  • Production operation consulting work
  • Analysis of oil and gas wells for uphole potential and enhancement of production potential
  • Engineering work for the selection and economic feasibility of a sour water disposal well
  • Writing and field supervision of wireline logging programs for open and cased hole evaluations.
  • Analysis of fractured carbonate structures to improve productivity

    Schlumberger of Canada – Manager Production Services for Grande Prairie,
    June 1985 to June 1987

  • Coordination of men and equipment in field
  • Cost control and pricing of production services
  • Scheduling of equipment for repair and monthly inspection
  • Hiring, training and dismissal of personnel in the district

    Schlumberger of Canada – Production Services Sales Engineer, Calgary,
    June 1983 to June 1985

  • Responsible for interpretation and sales of all production service products for sixty clients
  • Analysis of all production services logs, Cement Analysis, Compensated Bond Logs, Cement Evaluation Log, Flowmeter, Temperature, Pressure, Density, Formation Sampling and Testing, Thermal Decay Logs, Radioactive Tracers

    Schlumberger of Canada – General Field Engineer, Arctic, Offshore and Western Canada
    January 1976 – June 1983

  • Responsibility for operation and maintenance of open and cased hole equipment
  • Logged and completed zones in sandstone and carbonate reservoirs. Completed large offshore oil and gas well (5000 bbl/day oil and 100 million/day gas
  • Interpretation of data at the wellsite
  • Training of field personnel and discipline when needed
  • Co-ordination of repair work for field units

    Iron Ore Company of Canada – Production Engineer, Labrador City, Newfoundland,
    June 1973 – June1975

  • Responsibility for day to day operation of men and equipment on a shift which included 200-ton haulage trucks, 12-cubic yard electric shovels and large rotary drills used in an open pit.
  • Personally managed up to thirty shift workers.
  • Average tonnage output per shift was thirty to forty thousand tons.

    Education:

    Bachelor of Applied Science, Mining Engineering, Queens University, Kingston, Ontario, 1973

    Continuing Education:

    Wellsite Blowout Prevention Ticket, H2S Ticket, First-Aid Ticket, Advanced Completion Design, DIMS Reporting System, Remedial Cementing, Drill Stem Testing Interpretation, Open Hole log Interpretation, Advanced Cased Hole Log Interpretation, Nodal Analysis, Production Logging Interpretation and many other related oilpatch courses